Browse Categories by Verbatim

Verbatim Video Series Part III: Programming the Alarm System

Posted by jBrown on Tue, Jun 7, 2011 @ 4:23 PM

Part three in RACO’s six-part video series covers programming the Verbatim autodialer’s alarm system. Part A http://www.youtube.com/watch?v=E9vOiC5vC0U Part B http://www.youtube.com/watch?v=d2KKqmOWuWE Now that you have your Verbatim Alarm System, it is time to program your unit. Following are instructions of how to finish the initial setup. 1. Clear and reset the system Turn the unit on and press the program button. This puts the device in program mode. Erase the system memory by dialing 9-3-5-9 and then press the enter button. 2. Phone number programming Now th... Continue Reading

Continue ReadingLeave a Comment Share This

Verbatim Video Series Part II: Installation

Posted by jBrown on Fri, May 13, 2011 @ 2:12 PM

Part two in RACO’s six-part video series covers installing the Verbatim autodialer. http://www.youtube.com/watch?v=adp0Yk9dmko 1. Choose a mounting location This location must be free from condensing humidity and have temperatures between 20°F and 130°F. The autodialer must be within 5 ft of a standard RJ11 phone jack and a grounded 120-V AC outlet. It is possible to mount Verbatim outdoors with the optional enclosure. An optional heater and thermostat is also available to keep the unit at the proper temperature. 2. Get connected Next, complete all of the autodialer’s wiri... Continue Reading

Continue ReadingLeave a Comment Share This

Verbatim Video Series Part I: Introduction

Posted by jBrown on Thu, Apr 14, 2011 @ 9:02 AM

RACO’s six-part video series introduces the Verbatim autodialer and gives viewers thebasics on installation, programming and installation. http://www.youtube.com/watch?v=WgXtEOvxziU The first installment presents Verbatim and all of its features. The system acts as a remote alarm monitor for remote or unattended facilities. The standard system can monitor four inputs at once, but options are available for up to 32. Verbatim usually monitors sensors like float or limit switches to alert it to alarm conditions, but some inputs can be set just for reporting purposes. When Verbatim sens... Continue Reading

Continue ReadingLeave a Comment Share This
Page 6 of 6« First...23456