Browse Categories by Product Training

Visit JWB Company at the NEWEA 2017 Annual Conference and Exhibit

Posted by dldaily on Sun, Jan 22, 2017 @ 1:22 PM

Visit Jamie Birkenburger with JWB Company (RACO Manufacturing and Engineering Rep) at the NEWEA 2017 Annual Conference and Exhibit at Booth 430, Level 3 (three). NEWEA 2017 is from January 23-25 at Marriott Copley Place in Boston, Massachusetts. WHAT IS NEWEA? NEWEA has always been recognized to convene the brightest minds and the most innovative water quality solutions in one place. These are the people who impact and improve your everyday life. There is no better demonstration of these influential industry leaders than at NEWEA’s Annual Conference. This prestigious conference, w... Continue Reading

Continue ReadingLeave a Comment Share This

RACO Manufacturing and Engineering Attending Rockwell Automation TechED – June 12-17, 2016 in Orlando, FL

Posted by dldaily on Mon, May 30, 2016 @ 3:34 PM

INSPIRE. EDUCATE. INNOVATE. WHAT PEOPLE SAY “Access to the Product Managers is wonderful… it’s the access to the people that makes Rockwell Automation TechED better than similar events held by others.”   “It is nice to be able to go to one place and get training on so many applications.”    PREMIUM EDUCATION The Rockwell Automation TechED event is a week-long software training event for end-users, systems integrators, distributors, partners, machine builders, and Rockwell Automation technical and sales personnel. Each year, attendees from a... Continue Reading

Continue ReadingLeave a Comment Share This

Tip of the Month: Integrating MicroLogix to Catalyst via Modbus Protocol Over RS485

Posted by jBrown on Tue, Jul 26, 2011 @ 7:23 AM

When setting up the Modbus RTU Master/Slave over an RS485 network, a three-wire cable is required to connect back to the interface converter. The Simple NULL Modem cable with external +24 vdc power is recommended, but the Allen-Bradley 1761-CBL cable is also functional. To begin, plug the cable to the round eight-pin mini DIN receptacle and set the P10 Jumpers for RS-485 on the Catalyst. Parametric changes are also required within the RSLogix 500 and Alarmware to synchronize the Modbus Drivers. Here are the steps: 1. Connect the MicroLogix to your PC using the required 1761-CBL cable ... Continue Reading

Continue ReadingLeave a Comment Share This

Access the RACO Support Center With Your Mobile Phone

Posted by jBrown on Tue, Jul 19, 2011 @ 4:30 AM

RACO’s Support Center is now available through your iPhone, iPad or Android for easy and convenient onsite access. Now, workers can browse content while in the field and get answers to more than 500 frequently asked questions. Simply type in www.racomobilesupport.com for access. The mobile website functions similarly to the original—just search for questions using the “Support Center-Answer” tab, set up a user profile through “My Page” or create your own question with the “Ask a Question” feature. Additionally, users have access to manuals and specs, product info, installati... Continue Reading

Continue ReadingView Comments (1) Share This

Tip of the Month: Integrating MicroLogix to Verbatim Gateway via Modbus Protocol over RS232

Posted by jBrown on Tue, Jul 12, 2011 @ 4:20 AM

The Verbatim Gateway system—interfaced with an Allen-Bradley MicroLogix family of PLCs containing a native Modbus RTU Slave driver—performs alarm and monitoring functions with existing wiring to PLCs as inputs via data communications. In order to facilitate data communications via Modbus RTU Master/Slave over RS232 data interface, RACO provides a NULL Modem serial cable, VAB-1. This cable has the RJ-45 connector required for the system. Below are instructions on how to integrate MicroLogix to Verbatim Gateway via Modbus Protocol over RS232. Communication setup for Allen-Bradley Mi... Continue Reading

Continue ReadingLeave a Comment Share This
Page 1 of 212